The high current capability of the LM2005 allows it to continuously endure either AC or DC short circuit of the output with a maximum supply voltage of 16V. This will protect the loudspeaker in a bridge mode, when a DC short of the output occurs on one side of the speaker.
The device will prevent the speaker from destruction by reducing the DC across the load (bridge mode) to typically less than 2 VDC(VSe14.4V, RLe4X), by an internal current pullback method.
The LM2005 can withstand a constant 28 VDC on the supply with no damage (maximum operating voltage is 18V). The device is also protected from load dump or dangerous transients up to 40V for 50 ms (every 1000 ms) on the supply with no damage.
The LM2005 is a dual high power amplifier, designed to deliver optimum performance and reliability for automotive applications. High current capability (3.5A) enables the device to deliver 10W/channel into 2X (LM2005T-S), or 20W bridged monaural (LM2005T-M) into 4X, with low distortion.
Features- Wide supply range (8V±18V)
- Externally programmable gain
- With or without bootstrap
- Low distortion
- Low noise
- High peak current capability
- PO=20W bridge
- High voltage protection
- AC and DC output short circuit protection to ground oracross load
- Thermal protection
- Inductive load protection
- Accidental open ground protection
- Immunity to 40V power supply transients
- Pin for pin compatible with TDA2005 (Datasheet)
No comments:
Post a Comment