Saturday, August 30, 2014

TDA1562Q Audio Amplifier 50W

 TDA1562Qgeneral description:

Philips designers have further improved a number of properties of the IC, among which the power output. According to the Philips datasheet, the improved device, the TDA1562Q, can deliver 70 watts into 4 ohms, but that is at the cost of the distortion, which at 10 per cent is rather too high, even for in a car. The prototype of the design described in this article provides 54 watts into 4 ohms at 1 per cent distortion. Since the number of requisite external components is smaller than in the case of the earlier device, the printed-circuit board is even more compact than that for the February 1995 amplifier.


 TDA1562Q features:

  • Low power dissipation during reproduction of music signals
  • Proof against short-circuits
  • Protection against excessive temperatures
  • Standby switch
  • No power-on or power-off clicks
  • Visible error indication
  • Measurement results (at Ub=14.4 V)
  • Supply voltage 8–18 V
  • Sensitivity 760 mV r.m.s.
  • Input impedance 70 kΩ
  • Power output 54 W r.m.s. into 4 Ω (f=1 kHz; THD+N=1%)
  • Harmonic distortion (THD+) at 1 W into 4 Ω: 0.046% (1 kHz)0.29% 20Hz) at 35 W into 4 Ω: 0.12% (1 kHz) 0.7% (20 kHz)
  • Signal-to-noise ratio (with 1 W into 4 Ω) 88 dBA
  • Power bandwidth 7.5 Hz – 185 kHz (at 25 W into 4 Ω)
  • Quiescent current about 135 mA (‘on’)

    TDA1562Q applications:


    • Television sets
    • Home-sound sets
    • Multimedia systems
    • All mains fed audio systems
    • Car audio (boosters).

    TDA1562Q amplifer diagram:


    TDA1562Q pcb:


    TDA1562Q part lists:

    • R1= 1MΩ
    • R2 = 4kΩ7
    • R3 = 1kΩ
    • R4 = 100kΩ
    • Capacitors:
    • C1,C2 = 470nF
    • C3,C4 = 10µF 63V radial
    • C5,C6,C8 = 4700µF 25V radial
    • (18mm max. dia., raster 7.5 mm)
    • C7 = 100nF, raster 5 mm
    • Semiconductors:
    • D1 = high-efficiency-LED
    • IC1 = TDA1562Q (Philips)
    • Miscellaneous:
    • S1 = single-pole on/off switch
    • Four spade connectors, PCB mount
    • Heatsink for IC1 (Rth<2.5 K/W)
    • PCB, order code 000004-1 (see Readers Services pages)

    No comments:

    Post a Comment